RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

IR9AJ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR9AJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734970999	5 Pkt	2 Pkt	-34 dBm	0.08 V
1734970089	7 Pkt	1 Pkt	-33 dBm	0.1 V
1734969179	2 Pkt	1 Pkt	-34 dBm	0.08 V
1734968269	1 Pkt	1 Pkt	-33 dBm	0.08 V
1734967359	2 Pkt	3 Pkt	-34 dBm	0.08 V
1734966449	15 Pkt	1 Pkt	-33 dBm	0.08 V
1734965539	10 Pkt	2 Pkt	-34 dBm	0.08 V
1734964629	8 Pkt	1 Pkt	-32 dBm	0.08 V
1734963719	11 Pkt	2 Pkt	-34 dBm	0.1 V
1734962809	10 Pkt	1 Pkt	-33 dBm	0.08 V
1734961899	7 Pkt	2 Pkt	-32 dBm	0.08 V
1734960989	12 Pkt	1 Pkt	-32 dBm	0.08 V
1734960079	10 Pkt	3 Pkt	-32 dBm	0.08 V
1734959169	17 Pkt	1 Pkt	-32 dBm	0.08 V
1734958259	13 Pkt	1 Pkt	-32 dBm	0.08 V
1734957349	17 Pkt	1 Pkt	-33 dBm	0.08 V
1734956440	11 Pkt	2 Pkt	-33 dBm	0.08 V
1734955529	15 Pkt	1 Pkt	-32 dBm	0.08 V
1734954619	12 Pkt	2 Pkt	-32 dBm	0.08 V
1734953709	11 Pkt	4 Pkt	-32 dBm	0.08 V
1734952799	4 Pkt	3 Pkt	-33 dBm	0.08 V
1734951889	10 Pkt	2 Pkt	-32 dBm	0.08 V
1734950979	11 Pkt	2 Pkt	-32 dBm	0.1 V
1734950069	14 Pkt	1 Pkt	-34 dBm	0.08 V
1734949159	4 Pkt	2 Pkt	-32 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)