RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LU1HD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU1HD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RSSI*	Voltage*
1730441716	8 Pkt	-57 dBm	14.64 V
1730439892	12 Pkt	-57 dBm	14.21 V
1730438069	10 Pkt	-58 dBm	14.19 V
1730436246	11 Pkt	-58 dBm	14.21 V
1730434422	12 Pkt	-57 dBm	14.21 V
1730430774	107 Pkt	-59 dBm	14.27 V
1730428945	63 Pkt	-58 dBm	14.23 V
1730427118	9 Pkt	-56 dBm	14.21 V
1730425295	8 Pkt	-56 dBm	14.23 V
1730423472	10 Pkt	-56 dBm	14.21 V
1730421649	12 Pkt	-57 dBm	14.21 V
1730419826	10 Pkt	-56 dBm	14.21 V
1730418003	18 Pkt	-57 dBm	14.27 V
1730416180	22 Pkt	-57 dBm	14.21 V
1730414356	10 Pkt	-57 dBm	14.31 V
1730412533	9 Pkt	-56 dBm	14.29 V
1730410710	10 Pkt	-58 dBm	14.23 V
1730408887	13 Pkt	-60 dBm	14.31 V
1730407063	12 Pkt	-61 dBm	14.19 V
1730405240	13 Pkt	-59 dBm	14.27 V
1730403417	12 Pkt	-60 dBm	14.33 V
1730401595	9 Pkt	-59 dBm	14.23 V
1730399771	10 Pkt	-59 dBm	14.23 V
1730397947	0 Pkt	-61 dBm	14.23 V
1730396048	11 Pkt	-62 dBm	14.27 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)