RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BM6HIP-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM6HIP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1730434247	24.3 C	18 p	49 p	1188 p
1730433030	23.6 C	18 p	48 p	1208 p
1730430647	23.6 C	13 p	49 p	1218 p
1730429447	23.3 C	17 p	60 p	1231 p
1730428247	24 C	19 p	65 p	1245 p
1730427047	23.9 C	24 p	83 p	1251 p
1730425847	23.6 C	22 p	78 p	1257 p
1730424647	23.6 C	37 p	74 p	1265 p
1730423447	24.2 C	19 p	52 p	1253 p
1730422246	23.6 C	18 p	53 p	1259 p
1730421046	23 C	15 p	73 p	1261 p
1730419847	23.3 C	20 p	82 p	1272 p
1730418647	22.5 C	38 p	76 p	1278 p
1730417447	24.2 C	24 p	49 p	1271 p
1730416247	22.6 C	14 p	36 p	1272 p
1730415048	22.8 C	11 p	33 p	1292 p
1730413848	22.9 C	11 p	35 p	1303 p
1730412647	22.9 C	11 p	38 p	1317 p
1730411447	24 C	13 p	39 p	1334 p
1730410248	23.5 C	14 p	37 p	1345 p
1730409048	23 C	12 p	35 p	1360 p
1730407848	23 C	11 p	38 p	1374 p
1730406648	23 C	12 p	38 p	1386 p
1730405447	23.7 C	15 p	40 p	1403 p
1730404247	23.1 C	11 p	38 p	1419 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)