RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS8FLU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS8FLU. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	Voltage*
1734966597	-63 dBm	0.06 V
1734965673	-62 dBm	0.37 V
1734964749	-64 dBm	0.08 V
1734963824	-62 dBm	0.04 V
1734962900	-64 dBm	0.35 V
1734961976	-63 dBm	0.08 V
1734961052	-64 dBm	0.06 V
1734960128	-64 dBm	0.25 V
1734959204	-64 dBm	0.49 V
1734958280	-64 dBm	0.35 V
1734957355	-63 dBm	0.25 V
1734956431	-61 dBm	0.27 V
1734955507	-61 dBm	0.06 V
1734954583	-63 dBm	0.31 V
1734953658	-62 dBm	0.06 V
1734952734	-63 dBm	0.51 V
1734951810	-64 dBm	0.06 V
1734950886	-63 dBm	0.06 V
1734949961	-63 dBm	0.37 V
1734949037	-63 dBm	1.07 V
1734948113	-63 dBm	0.18 V
1734947189	-64 dBm	0.39 V
1734946264	-62 dBm	0.02 V
1734945340	-63 dBm	0.37 V
1734944416	-60 dBm	0.59 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)