RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VE2RPL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE2RPL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Batterie*	Temp Interieur*	Temp Exterieur*
1734915736	12.6 Volts	-12 Deg.C	-19 Deg.C
1734914835	12.6 Volts	-12 Deg.C	-18.5 Deg.C
1734913933	12.62 Volts	-12 Deg.C	-18.5 Deg.C
1734913032	12.62 Volts	-12 Deg.C	-18.5 Deg.C
1734912128	12.62 Volts	-12 Deg.C	-18.5 Deg.C
1734911227	12.62 Volts	-12 Deg.C	-18.5 Deg.C
1734910325	12.65 Volts	-12 Deg.C	-18 Deg.C
1734909424	12.65 Volts	-12 Deg.C	-18 Deg.C
1734907622	12.67 Volts	-12 Deg.C	-18 Deg.C
1734906721	12.67 Volts	-12 Deg.C	-18 Deg.C
1734905818	12.67 Volts	-12 Deg.C	-18 Deg.C
1734904915	12.67 Volts	-12 Deg.C	-18.5 Deg.C
1734904014	12.7 Volts	-12 Deg.C	-18.5 Deg.C
1734903113	12.7 Volts	-12 Deg.C	-18 Deg.C
1734902210	12.7 Volts	-12 Deg.C	-18 Deg.C
1734901309	12.72 Volts	-12 Deg.C	-18 Deg.C
1734900409	12.75 Volts	-12 Deg.C	-18 Deg.C
1734899501	12.62 Volts	-12 Deg.C	-18 Deg.C
1734897693	13.06 Volts	-12 Deg.C	-17.5 Deg.C
1734896792	13.44 Volts	-12 Deg.C	-17 Deg.C
1734895890	14.54 Volts	-11.5 Deg.C	-16 Deg.C
1734894989	14.69 Volts	-12 Deg.C	-13 Deg.C
1734894088	14.48 Volts	-12 Deg.C	-14 Deg.C
1734893187	14.56 Volts	-12 Deg.C	-12.5 Deg.C
1734892286	14.48 Volts	-12.5 Deg.C	-12 Deg.C

*Used Equation Coefficients:

Batterie: 0, 0.0255, 0

Temp Interieur: 0, 0.5, -273

Temp Exterieur: 0, 0.5, -278

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)