RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YB8VFB-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB8VFB-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1736690311	0 Pkt	-52 dBm	0.04 V
1736689989	0 Pkt	-50 dBm	0.02 V
1736689667	0 Pkt	-52 dBm	0.02 V
1736689345	0 Pkt	-49 dBm	0.04 V
1736689023	1 Pkt	-47 dBm	0 V
1736688701	1 Pkt	-48 dBm	0.02 V
1736688379	0 Pkt	-53 dBm	0.02 V
1736688057	0 Pkt	-49 dBm	0.02 V
1736687735	0 Pkt	-55 dBm	0.02 V
1736687413	1 Pkt	-49 dBm	0.02 V
1736687091	0 Pkt	-48 dBm	0.04 V
1736686769	0 Pkt	-49 dBm	0.02 V
1736686447	0 Pkt	-51 dBm	0.02 V
1736686125	0 Pkt	-52 dBm	0 V
1736685803	0 Pkt	-53 dBm	0.02 V
1736685481	0 Pkt	-55 dBm	0 V
1736685159	1 Pkt	-51 dBm	0.02 V
1736684837	0 Pkt	-48 dBm	0.02 V
1736684533	0 Pkt	-53 dBm	0.04 V
1736684193	0 Pkt	-49 dBm	0.02 V
1736683871	0 Pkt	-50 dBm	0.04 V
1736683549	0 Pkt	-48 dBm	0.02 V
1736683227	1 Pkt	-45 dBm	0.02 V
1736682905	0 Pkt	-44 dBm	0.02 V
1736682583	0 Pkt	-45 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)