RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS0TK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS0TK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734884131	40 Pkt	0 Pkt	0 Pkt	-45 dBm	14.79 V
1734882905	36 Pkt	0 Pkt	0 Pkt	-44 dBm	14.79 V
1734881665	2 Pkt	0 Pkt	0 Pkt	-45 dBm	14.79 V
1734880367	30 Pkt	0 Pkt	0 Pkt	-46 dBm	14.68 V
1734879134	31 Pkt	1 Pkt	0 Pkt	-44 dBm	14.79 V
1734877903	99 Pkt	0 Pkt	1 Pkt	-44 dBm	14.77 V
1734876672	199 Pkt	0 Pkt	0 Pkt	-45 dBm	14.66 V
1734875443	38 Pkt	0 Pkt	0 Pkt	-44 dBm	14.79 V
1734874185	54 Pkt	0 Pkt	0 Pkt	-43 dBm	14.77 V
1734872958	34 Pkt	0 Pkt	0 Pkt	-44 dBm	14.66 V
1734871728	35 Pkt	2 Pkt	1 Pkt	-43 dBm	14.77 V
1734870502	5 Pkt	0 Pkt	0 Pkt	-44 dBm	14.79 V
1734869213	21 Pkt	1 Pkt	0 Pkt	-46 dBm	14.66 V
1734867985	22 Pkt	0 Pkt	0 Pkt	-46 dBm	14.66 V
1734866757	42 Pkt	0 Pkt	0 Pkt	-46 dBm	14.66 V
1734865516	23 Pkt	0 Pkt	0 Pkt	-44 dBm	14.66 V
1734864287	28 Pkt	0 Pkt	0 Pkt	-45 dBm	14.77 V
1734863056	42 Pkt	0 Pkt	0 Pkt	-45 dBm	14.66 V
1734861784	36 Pkt	0 Pkt	0 Pkt	-45 dBm	14.66 V
1734860553	24 Pkt	1 Pkt	0 Pkt	-43 dBm	14.77 V
1734859324	1 Pkt	0 Pkt	0 Pkt	-45 dBm	14.77 V
1734858029	53 Pkt	0 Pkt	0 Pkt	-46 dBm	14.79 V
1734856802	48 Pkt	0 Pkt	0 Pkt	-47 dBm	14.66 V
1734855576	42 Pkt	0 Pkt	0 Pkt	-46 dBm	14.77 V
1734854348	28 Pkt	1 Pkt	0 Pkt	-45 dBm	14.66 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)