This is the latest recevied telemetry packets stored in our database for station/object DL1KPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | QNH* | temp.out* |
|---|---|---|---|---|---|
| 1730439958 | 1011.6 hPa | 21.2 C deg | 56.8 % | 1024.3 hPa | 0 C deg |
| 1730438158 | 1011.6 hPa | 20.9 C deg | 57.4 % | 1024.3 hPa | 0 C deg |
| 1730436358 | 1011.7 hPa | 21 C deg | 57.2 % | 1024.5 hPa | 0 C deg |
| 1730434558 | 1011.9 hPa | 20.9 C deg | 57.4 % | 1024.7 hPa | 0 C deg |
| 1730430957 | 1012.3 hPa | 21 C deg | 57.1 % | 1025.1 hPa | 0 C deg |
| 1730429157 | 1012.4 hPa | 21.2 C deg | 56.6 % | 1025.1 hPa | 0 C deg |
| 1730427357 | 1012.4 hPa | 21 C deg | 56.8 % | 1025.2 hPa | 0 C deg |
| 1730425557 | 1012.5 hPa | 21.1 C deg | 57 % | 1025.3 hPa | 0 C deg |
| 1730423757 | 1012.6 hPa | 21.2 C deg | 56.9 % | 1025.4 hPa | 0 C deg |
| 1730421957 | 1012.6 hPa | 21.2 C deg | 57.2 % | 1025.4 hPa | 0 C deg |
| 1730420157 | 1012.5 hPa | 21.3 C deg | 57 % | 1025.3 hPa | 0 C deg |
| 1730418357 | 1012.7 hPa | 21.3 C deg | 57.4 % | 1025.4 hPa | 0 C deg |
| 1730416557 | 1012.8 hPa | 21.4 C deg | 57.4 % | 1025.6 hPa | 0 C deg |
| 1730414756 | 1012.9 hPa | 21.7 C deg | 56.5 % | 1025.6 hPa | 0 C deg |
| 1730412956 | 1012.8 hPa | 21.7 C deg | 58 % | 1025.5 hPa | 0 C deg |
| 1730410455 | 1012.9 hPa | 21.7 C deg | 58.3 % | 1025.7 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)