RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

WB2QGZ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WB2QGZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1734981845	190 Pkts	189 Pkts	62 Pkts	12 C
1734978245	273 Pkts	272 Pkts	90 Pkts	12 C
1734974644	275 Pkts	274 Pkts	78 Pkts	11 C
1734971044	248 Pkts	247 Pkts	87 Pkts	11 C
1734967444	222 Pkts	221 Pkts	79 Pkts	10 C
1734963844	243 Pkts	242 Pkts	80 Pkts	10 C
1734960244	235 Pkts	234 Pkts	89 Pkts	10 C
1734956644	216 Pkts	215 Pkts	70 Pkts	10 C
1734953045	196 Pkts	195 Pkts	60 Pkts	10 C
1734949447	195 Pkts	194 Pkts	60 Pkts	10 C
1734945845	199 Pkts	198 Pkts	67 Pkts	11 C
1734942246	212 Pkts	211 Pkts	64 Pkts	11 C
1734938644	199 Pkts	198 Pkts	68 Pkts	10 C
1734927844	206 Pkts	205 Pkts	74 Pkts	11 C
1734924244	218 Pkts	217 Pkts	80 Pkts	11 C
1734920644	221 Pkts	220 Pkts	83 Pkts	11 C
1734917045	230 Pkts	229 Pkts	76 Pkts	11 C
1734913444	145 Pkts	144 Pkts	46 Pkts	11 C
1734909844	218 Pkts	217 Pkts	81 Pkts	11 C
1734906244	236 Pkts	235 Pkts	76 Pkts	12 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)