This is the latest recevied telemetry packets stored in our database for station/object DB0TIT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Effto* |
|---|---|---|---|---|---|
| 1734917424 | 13.9 Volt | 710 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734913825 | 13.9 Volt | 600 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734910226 | 13.9 Volt | 720 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734906625 | 13.9 Volt | 660 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734903025 | 13.9 Volt | 650 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734899430 | 13.9 Volt | 680 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734895827 | 13.9 Volt | 600 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734892226 | 13.9 Volt | 670 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734888628 | 13.9 Volt | 660 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734885026 | 13.9 Volt | 750 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734881427 | 13.9 Volt | 630 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734877827 | 13.9 Volt | 490 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734874229 | 13.9 Volt | 530 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734870627 | 13.9 Volt | 450 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734867027 | 13.9 Volt | 410 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734863427 | 13.9 Volt | 450 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734859827 | 13.9 Volt | 400 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734856228 | 13.9 Volt | 440 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734852628 | 13.9 Volt | 420 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734849028 | 13.9 Volt | 590 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734849028 | 13.9 Volt | 590 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734845429 | 13.9 Volt | 640 Pkt | 0 Pkt | 51 Pcnt | 0 None |
| 1734845428 | 13.9 Volt | 640 Pkt | 0 Pkt | 51 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Effto: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)