This is the latest recevied telemetry packets stored in our database for station/object EA1RCP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1731817439 | 2.98 VDC | 0 | 0 | 0 | 0 |
| 1731817426 | 3.01 VDC | 0 | 0 | 0 | 0 |
| 1731816526 | 3.1 VDC | 0 | 0 | 0 | 0 |
| 1731815626 | 3.21 VDC | 0 | 0 | 0 | 0 |
| 1731814726 | 3.29 VDC | 0 | 0 | 0 | 0 |
| 1731813826 | 3.37 VDC | 0 | 0 | 0 | 0 |
| 1731812926 | 3.4 VDC | 0 | 0 | 0 | 0 |
| 1731812026 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1731811126 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1731810226 | 3.51 VDC | 0 | 0 | 0 | 0 |
| 1731809325 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1731808425 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1731807525 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1731806625 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1731805725 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1731804825 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1731803925 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1731803025 | 3.69 VDC | 0 | 0 | 0 | 0 |
| 1731802125 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1731801225 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1731800325 | 3.75 VDC | 0 | 0 | 0 | 0 |
| 1731799424 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1731798524 | 3.75 VDC | 0 | 0 | 0 | 0 |
| 1731796724 | 3.79 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)