RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E27BJH-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E27BJH-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734929841	0 Pkt	4 Pkt	-63 dBm	8.41 V
1734928619	0 Pkt	0 Pkt	-63 dBm	8.39 V
1734927397	0 Pkt	0 Pkt	-63 dBm	8.41 V
1734926175	0 Pkt	0 Pkt	-63 dBm	8.39 V
1734924953	0 Pkt	1 Pkt	-64 dBm	8.39 V
1734923731	0 Pkt	1 Pkt	-63 dBm	8.24 V
1734922509	0 Pkt	1 Pkt	-63 dBm	8.41 V
1734921287	0 Pkt	2 Pkt	-64 dBm	8.41 V
1734920064	0 Pkt	0 Pkt	-64 dBm	8.24 V
1734918842	0 Pkt	0 Pkt	-61 dBm	8.41 V
1734917620	0 Pkt	0 Pkt	-64 dBm	8.22 V
1734916398	0 Pkt	0 Pkt	-63 dBm	8.39 V
1734915176	0 Pkt	0 Pkt	-64 dBm	8.41 V
1734913955	0 Pkt	0 Pkt	-64 dBm	8.41 V
1734912732	0 Pkt	0 Pkt	-62 dBm	8.24 V
1734911511	0 Pkt	0 Pkt	-63 dBm	8.41 V
1734910289	0 Pkt	0 Pkt	-63 dBm	8.41 V
1734909066	0 Pkt	0 Pkt	-62 dBm	8.43 V
1734907844	0 Pkt	0 Pkt	-63 dBm	8.22 V
1734906622	0 Pkt	0 Pkt	-64 dBm	8.37 V
1734905400	0 Pkt	1 Pkt	-63 dBm	8.41 V
1734904142	0 Pkt	0 Pkt	-63 dBm	8.41 V
1734902920	1 Pkt	0 Pkt	-65 dBm	8.41 V
1734901698	0 Pkt	0 Pkt	-62 dBm	8.41 V
1734900476	0 Pkt	0 Pkt	-62 dBm	8.39 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)