This is the latest recevied telemetry packets stored in our database for station/object F5ZMN-LX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Lum.* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734954160 | 88 % | 0 | 0 | 0 | 0 |
| 1734953845 | 88 % | 0 | 0 | 0 | 0 |
| 1734953530 | 93 % | 0 | 0 | 0 | 0 |
| 1734953216 | 90 % | 0 | 0 | 0 | 0 |
| 1734952900 | 87 % | 0 | 0 | 0 | 0 |
| 1734952586 | 92 % | 0 | 0 | 0 | 0 |
| 1734952271 | 92 % | 0 | 0 | 0 | 0 |
| 1734951956 | 87 % | 0 | 0 | 0 | 0 |
| 1734951641 | 96 % | 0 | 0 | 0 | 0 |
| 1734951326 | 88 % | 0 | 0 | 0 | 0 |
| 1734951011 | 88 % | 0 | 0 | 0 | 0 |
| 1734950696 | 80 % | 0 | 0 | 0 | 0 |
| 1734950381 | 81 % | 0 | 0 | 0 | 0 |
| 1734950067 | 82 % | 0 | 0 | 0 | 0 |
| 1734949752 | 85 % | 0 | 0 | 0 | 0 |
| 1734949437 | 82 % | 0 | 0 | 0 | 0 |
| 1734949122 | 80 % | 0 | 0 | 0 | 0 |
| 1734948807 | 80 % | 0 | 0 | 0 | 0 |
| 1734948493 | 81 % | 0 | 0 | 0 | 0 |
| 1734948178 | 82 % | 0 | 0 | 0 | 0 |
| 1734947863 | 84 % | 0 | 0 | 0 | 0 |
| 1734947548 | 81 % | 0 | 0 | 0 | 0 |
| 1734947220 | 78 % | 0 | 0 | 0 | 0 |
| 1734946906 | 0 % | 0 | 0 | 0 | 0 |
| 1734946591 | 0 % | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Lum.: 0, 1, 0
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)