This is the latest recevied telemetry packets stored in our database for station/object DL9MAC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | QNH* | temp.out* |
|---|---|---|---|---|---|
| 1730857092 | 956.3 hPa | 23.9 C deg | 49.5 % | 1023.2 hPa | 0 C deg |
| 1730855286 | 956.3 hPa | 24 C deg | 49.2 % | 1023.1 hPa | 0 C deg |
| 1730849896 | 956.3 hPa | 24.2 C deg | 48.7 % | 1023.1 hPa | 0 C deg |
| 1730848086 | 956.4 hPa | 24.4 C deg | 48.4 % | 1023.2 hPa | 0 C deg |
| 1730846289 | 956.3 hPa | 24.5 C deg | 48.2 % | 1023 hPa | 0 C deg |
| 1730844486 | 956.1 hPa | 24.4 C deg | 48.5 % | 1022.8 hPa | 0 C deg |
| 1730842685 | 956 hPa | 24.6 C deg | 48 % | 1022.6 hPa | 0 C deg |
| 1730840885 | 955.9 hPa | 24.8 C deg | 48.3 % | 1022.6 hPa | 0 C deg |
| 1730839085 | 955.9 hPa | 24.7 C deg | 48.3 % | 1022.5 hPa | 0 C deg |
| 1730837285 | 955.7 hPa | 24.9 C deg | 48 % | 1022.2 hPa | 0 C deg |
| 1730835485 | 955.5 hPa | 24.9 C deg | 48 % | 1022.1 hPa | 0 C deg |
| 1730833685 | 955.5 hPa | 25 C deg | 47.6 % | 1022.1 hPa | 0 C deg |
| 1730831885 | 955.6 hPa | 25.7 C deg | 46 % | 1022 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)