This is the latest recevied telemetry packets stored in our database for station/object WB8ZFL-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718549516 | 134 | 110 | 255 | 71 | 52 |
1718549335 | 134 | 109 | 255 | 71 | 53 |
1718549154 | 134 | 109 | 255 | 72 | 53 |
1718548973 | 134 | 109 | 255 | 72 | 53 |
1718548792 | 134 | 109 | 255 | 72 | 53 |
1718548611 | 134 | 108 | 255 | 72 | 53 |
1718548430 | 134 | 108 | 255 | 72 | 53 |
1718548249 | 134 | 106 | 255 | 73 | 54 |
1718548064 | 134 | 105 | 255 | 73 | 55 |
1718547883 | 134 | 104 | 255 | 74 | 56 |
1718547702 | 134 | 103 | 255 | 75 | 57 |
1718547521 | 133 | 99 | 255 | 76 | 59 |
1718547339 | 134 | 95 | 255 | 79 | 63 |
1718547157 | 134 | 83 | 255 | 71 | 50 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)