RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YH1RIX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH1RIX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734969484	33 Pkt	12 Pkt	-8 dBm	12.3 V
1734968546	35 Pkt	12 Pkt	-7 dBm	12.3 V
1734968545	35 Pkt	12 Pkt	-6 dBm	12.3 V
1734967606	35 Pkt	13 Pkt	-7 dBm	12.33 V
1734966667	34 Pkt	8 Pkt	-7 dBm	12.3 V
1734965730	24 Pkt	7 Pkt	-7 dBm	12.3 V
1734964796	31 Pkt	8 Pkt	-8 dBm	12.3 V
1734963861	28 Pkt	9 Pkt	-7 dBm	12.3 V
1734962923	34 Pkt	9 Pkt	-8 dBm	12.3 V
1734961987	34 Pkt	9 Pkt	-7 dBm	12.33 V
1734961051	38 Pkt	7 Pkt	-6 dBm	12.3 V
1734961051	38 Pkt	7 Pkt	-7 dBm	12.3 V
1734960118	27 Pkt	8 Pkt	-8 dBm	12.33 V
1734960118	27 Pkt	8 Pkt	-7 dBm	12.33 V
1734959183	30 Pkt	7 Pkt	-8 dBm	12.33 V
1734958247	22 Pkt	7 Pkt	-7 dBm	12.3 V
1734957314	32 Pkt	7 Pkt	-7 dBm	12.3 V
1734956381	28 Pkt	7 Pkt	-7 dBm	12.3 V
1734955447	36 Pkt	1 Pkt	-8 dBm	12.33 V
1734954519	7 Pkt	0 Pkt	-8 dBm	12.33 V
1734954289	41 Pkt	19 Pkt	-5 dBm	12.33 V
1734953337	43 Pkt	20 Pkt	-5 dBm	12.3 V
1734952388	38 Pkt	22 Pkt	-8 dBm	12.33 V
1734951435	37 Pkt	20 Pkt	-8 dBm	12.33 V
1734950486	33 Pkt	20 Pkt	-7 dBm	12.33 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)