This is the latest recevied telemetry packets stored in our database for station/object DB0RAB-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | QNH* | temp.out* |
|---|---|---|---|---|---|
| 1734958427 | 903.8 hPa | 1.1 C deg | 74.1 % | 1019.2 hPa | 6.2 C deg |
| 1734956630 | 903.5 hPa | 1.4 C deg | 71.7 % | 1018.6 hPa | 6.1 C deg |
| 1734951222 | 903 hPa | 1.7 C deg | 69.7 % | 1017.9 hPa | 6.3 C deg |
| 1734949428 | 902.7 hPa | 2 C deg | 68.4 % | 1017.5 hPa | 6.4 C deg |
| 1734947623 | 902.6 hPa | 1.8 C deg | 68.8 % | 1017.5 hPa | 6.4 C deg |
| 1734945827 | 902.2 hPa | 2 C deg | 67.9 % | 1016.9 hPa | 6.4 C deg |
| 1734944022 | 901.7 hPa | 2.1 C deg | 67.6 % | 1016.3 hPa | 6.4 C deg |
| 1734940427 | 900.5 hPa | 2.3 C deg | 66.9 % | 1014.9 hPa | 6.5 C deg |
| 1734936827 | 899.3 hPa | 2.3 C deg | 66.8 % | 1013.5 hPa | 6.5 C deg |
| 1734897220 | 897.6 hPa | 3.2 C deg | 68.9 % | 1011.2 hPa | 7.4 C deg |
| 1734895430 | 897.1 hPa | 3.2 C deg | 69 % | 1010.6 hPa | 7.3 C deg |
| 1734891819 | 897.1 hPa | 3.2 C deg | 69.4 % | 1010.6 hPa | 7.4 C deg |
| 1734890019 | 896.8 hPa | 3.2 C deg | 69.8 % | 1010.3 hPa | 7.5 C deg |
| 1734888218 | 896.5 hPa | 3.2 C deg | 70.2 % | 1010 hPa | 7.8 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)