RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SPRFLD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SPRFLD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Rx10m*	Temp*	Vin*
1734903162	570 Pkt	98 Pkt	50.2 F	14.55 Volt
1734902862	560 Pkt	104 Pkt	50.2 F	14.55 Volt
1734902562	530 Pkt	84 Pkt	50.2 F	14.55 Volt
1734902262	530 Pkt	85 Pkt	50.2 F	14.48 Volt
1734902261	530 Pkt	85 Pkt	50.2 F	14.48 Volt
1734901961	520 Pkt	105 Pkt	50.2 F	14.48 Volt
1734901662	510 Pkt	95 Pkt	50.2 F	14.48 Volt
1734901362	520 Pkt	87 Pkt	50.2 F	14.55 Volt
1734901062	520 Pkt	79 Pkt	51.1 F	14.48 Volt
1734900762	500 Pkt	76 Pkt	50.2 F	14.48 Volt
1734900462	500 Pkt	77 Pkt	50.2 F	14.55 Volt
1734900462	500 Pkt	77 Pkt	50.2 F	14.55 Volt
1734900162	480 Pkt	74 Pkt	50.2 F	14.48 Volt
1734899861	490 Pkt	84 Pkt	50.2 F	14.48 Volt
1734899562	480 Pkt	66 Pkt	50.2 F	14.48 Volt
1734899262	480 Pkt	76 Pkt	50.2 F	14.48 Volt
1734898962	460 Pkt	72 Pkt	50.2 F	14.48 Volt
1734898062	440 Pkt	101 Pkt	50.2 F	14.48 Volt
1734897762	420 Pkt	67 Pkt	50.2 F	14.55 Volt
1734897462	420 Pkt	64 Pkt	50.2 F	14.48 Volt
1734897162	410 Pkt	67 Pkt	50.2 F	14.55 Volt
1734896863	400 Pkt	62 Pkt	50.2 F	14.48 Volt
1734896862	400 Pkt	62 Pkt	50.2 F	14.48 Volt
1734896561	390 Pkt	73 Pkt	50.2 F	14.48 Volt
1734896262	380 Pkt	74 Pkt	50.2 F	14.48 Volt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Dig1h: 0, 10, 0

Temp: 0, 0.9, -83

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)