RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YC0TBU-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*
1734943435	10 Pkt	1 Pkt	4 Pkt
1734943128	9 Pkt	1 Pkt	4 Pkt
1734942822	11 Pkt	1 Pkt	4 Pkt
1734942516	10 Pkt	1 Pkt	4 Pkt
1734941791	8 Pkt	1 Pkt	4 Pkt
1734941485	11 Pkt	1 Pkt	4 Pkt
1734941179	11 Pkt	1 Pkt	4 Pkt
1734940873	10 Pkt	1 Pkt	4 Pkt
1734940567	11 Pkt	1 Pkt	4 Pkt
1734940260	10 Pkt	1 Pkt	4 Pkt
1734939954	10 Pkt	1 Pkt	4 Pkt
1734939648	11 Pkt	1 Pkt	4 Pkt
1734939342	10 Pkt	1 Pkt	4 Pkt
1734939035	10 Pkt	1 Pkt	4 Pkt
1734938729	10 Pkt	1 Pkt	4 Pkt
1734938453	8 Pkt	2 Pkt	4 Pkt
1734938147	9 Pkt	2 Pkt	4 Pkt
1734937841	10 Pkt	1 Pkt	4 Pkt
1734937602	12 Pkt	1 Pkt	4 Pkt
1734937295	11 Pkt	1 Pkt	4 Pkt
1734936989	11 Pkt	2 Pkt	4 Pkt
1734936683	12 Pkt	1 Pkt	4 Pkt
1734904860	13 Pkt	1 Pkt	4 Pkt
1734904554	12 Pkt	1 Pkt	4 Pkt
1734904248	13 Pkt	0 Pkt	4 Pkt

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, 1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)