RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK2RZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	FreeM*	RxP*	TxP*
1734954918	1.76 Load	13817 Mb	1578 Pkt	1299 Pkt
1734954318	1.8 Load	13801 Mb	1466 Pkt	692 Pkt
1734953718	1.74 Load	13823 Mb	1642 Pkt	729 Pkt
1734953118	1.77 Load	13833 Mb	1642 Pkt	1319 Pkt
1734952517	1.76 Load	13825 Mb	1557 Pkt	739 Pkt
1734951917	1.73 Load	13850 Mb	1789 Pkt	821 Pkt
1734951317	1.69 Load	13833 Mb	1540 Pkt	1295 Pkt
1734950717	1.71 Load	13855 Mb	1523 Pkt	721 Pkt
1734950117	1.67 Load	13859 Mb	1672 Pkt	762 Pkt
1734949517	1.76 Load	13857 Mb	1589 Pkt	1362 Pkt
1734948918	1.72 Load	13816 Mb	1618 Pkt	720 Pkt
1734948318	1.74 Load	13813 Mb	1882 Pkt	1020 Pkt
1734947718	1.72 Load	13817 Mb	1679 Pkt	1385 Pkt
1734947117	1.71 Load	13821 Mb	1541 Pkt	752 Pkt
1734946517	1.72 Load	13832 Mb	1734 Pkt	946 Pkt
1734945917	1.83 Load	13841 Mb	2089 Pkt	1809 Pkt
1734945317	1.74 Load	13849 Mb	1599 Pkt	844 Pkt
1734944717	1.76 Load	13851 Mb	1613 Pkt	784 Pkt
1734944117	1.77 Load	13837 Mb	1591 Pkt	1328 Pkt
1734943518	1.76 Load	13809 Mb	1646 Pkt	703 Pkt
1734942918	1.76 Load	13804 Mb	1307 Pkt	595 Pkt
1734942318	1.72 Load	13806 Mb	1229 Pkt	1143 Pkt
1734941718	1.74 Load	13826 Mb	1499 Pkt	849 Pkt
1734941118	1.71 Load	13826 Mb	1223 Pkt	575 Pkt
1734940517	1.75 Load	13826 Mb	1461 Pkt	1409 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)