RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TABNSH Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TABNSH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1735926021	120	27	74	42	49
1735925397	121	27	74	42	49
1735924778	121	29	73	42	49
1735924158	122	23	74	42	49
1735923543	122	27	74	68	49
1735922926	126	22	74	42	48
1735922311	127	24	102	42	74
1735921700	127	23	74	42	48
1735921087	126	37	75	42	49
1735920474	126	40	69	42	49
1735919865	126	29	76	66	49
1735919249	123	25	77	41	49
1735918633	121	21	72	42	50
1735848052	115	29	77	41	49
1735847434	115	25	77	42	49
1735846815	111	0	48	67	49
1735846197	116	22	77	42	48
1735845582	116	24	77	42	49
1735844963	116	25	77	42	77
1735844348	118	26	76	42	49
1735843735	118	25	77	42	50
1735843118	118	23	77	42	49
1735842500	121	24	72	42	49

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)