RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TB3DEU-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB3DEU-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734938471	9 Pkt	10 Pkt	0 Pkt	-75 dBm	12.08 V
1734938157	18 Pkt	4 Pkt	1 Pkt	-75 dBm	12.08 V
1734937843	16 Pkt	6 Pkt	0 Pkt	-76 dBm	11.96 V
1734937530	18 Pkt	6 Pkt	2 Pkt	-75 dBm	12.08 V
1734937216	16 Pkt	8 Pkt	4 Pkt	-78 dBm	12.08 V
1734936904	20 Pkt	7 Pkt	1 Pkt	-76 dBm	11.53 V
1734936588	16 Pkt	9 Pkt	1 Pkt	-76 dBm	12.08 V
1734936274	22 Pkt	4 Pkt	2 Pkt	-73 dBm	11.61 V
1734928757	13 Pkt	3 Pkt	2 Pkt	-76 dBm	12.1 V
1734928443	11 Pkt	6 Pkt	0 Pkt	-76 dBm	12.12 V
1734928130	9 Pkt	4 Pkt	2 Pkt	-75 dBm	12.08 V
1734927816	18 Pkt	4 Pkt	0 Pkt	-75 dBm	12.08 V
1734927503	9 Pkt	4 Pkt	1 Pkt	-75 dBm	12.12 V
1734927189	10 Pkt	3 Pkt	0 Pkt	-75 dBm	11.94 V
1734926876	15 Pkt	4 Pkt	0 Pkt	-75 dBm	12.08 V
1734926562	10 Pkt	6 Pkt	1 Pkt	-75 dBm	12.02 V
1734926248	16 Pkt	4 Pkt	2 Pkt	-75 dBm	12.08 V
1734925935	14 Pkt	3 Pkt	0 Pkt	-75 dBm	12.06 V
1734925621	17 Pkt	4 Pkt	0 Pkt	-75 dBm	12.08 V
1734925315	16 Pkt	2 Pkt	3 Pkt	-77 dBm	12.1 V
1734924994	14 Pkt	1 Pkt	2 Pkt	-74 dBm	12.02 V
1734924680	3 Pkt	1 Pkt	0 Pkt	-76 dBm	11.94 V
1734924253	8 Pkt	3 Pkt	0 Pkt	-74 dBm	12.02 V
1734923938	7 Pkt	8 Pkt	0 Pkt	-74 dBm	12.08 V
1734923625	17 Pkt	6 Pkt	0 Pkt	-76 dBm	11.98 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)