RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BX6AM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX6AM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1734968035	33.4 C	33 p	88 p	3668 p
1734966836	34.3 C	29 p	85 p	3664 p
1734965635	34 C	26 p	86 p	3662 p
1734964435	34.2 C	30 p	97 p	3662 p
1734963236	34.4 C	30 p	103 p	3660 p
1734962035	34.4 C	37 p	101 p	3665 p
1734960835	35 C	36 p	96 p	3682 p
1734959635	34.3 C	28 p	95 p	3717 p
1734958436	33.7 C	32 p	100 p	3790 p
1734957235	35.9 C	35 p	111 p	3853 p
1734956036	34.9 C	33 p	129 p	3913 p
1734954835	34 C	43 p	192 p	3952 p
1734953635	35.4 C	53 p	204 p	3958 p
1734952436	34.4 C	96 p	195 p	3946 p
1734951235	34.6 C	55 p	237 p	3890 p
1734950035	34.3 C	44 p	295 p	3883 p
1734948835	35.1 C	138 p	333 p	3906 p
1734947635	33.8 C	113 p	248 p	3813 p
1734946435	34.4 C	82 p	189 p	3773 p
1734945235	33.9 C	53 p	174 p	3781 p
1734944035	35.5 C	54 p	201 p	3833 p
1734942835	34.8 C	67 p	204 p	3868 p
1734941635	34.5 C	80 p	195 p	3883 p
1734940435	34.2 C	57 p	160 p	3895 p
1734939235	34.9 C	58 p	159 p	3941 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)