This is the latest recevied telemetry packets stored in our database for station/object F1ZZM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx ed* | Dig ed* | Decode* | Value5* |
|---|---|---|---|---|---|
| 04/24/2025 1:15:37 PM+00:00 | 0 Volt | 54 Packet | 14 Packet | 75 % | 0 |
| 04/24/2025 12:14:37 PM+00:00 | 0 Volt | 57 Packet | 16 Packet | 74 % | 0 |
| 04/24/2025 11:13:37 AM+00:00 | 0 Volt | 54 Packet | 13 Packet | 75 % | 0 |
| 04/24/2025 10:12:37 AM+00:00 | 0 Volt | 58 Packet | 10 Packet | 76 % | 0 |
| 04/24/2025 9:11:37 AM+00:00 | 0 Volt | 59 Packet | 14 Packet | 66 % | 0 |
| 04/24/2025 8:10:37 AM+00:00 | 0 Volt | 55 Packet | 11 Packet | 63 % | 0 |
| 04/24/2025 7:09:37 AM+00:00 | 0 Volt | 50 Packet | 8 Packet | 60 % | 0 |
| 04/24/2025 6:08:38 AM+00:00 | 0 Volt | 55 Packet | 9 Packet | 60 % | 0 |
| 04/24/2025 5:07:37 AM+00:00 | 0 Volt | 50 Packet | 8 Packet | 57 % | 0 |
| 04/24/2025 4:06:37 AM+00:00 | 0 Volt | 41 Packet | 5 Packet | 57 % | 0 |
| 04/24/2025 3:05:37 AM+00:00 | 0 Volt | 44 Packet | 6 Packet | 62 % | 0 |
| 04/24/2025 2:04:37 AM+00:00 | 0 Volt | 46 Packet | 6 Packet | 58 % | 0 |
| 04/24/2025 1:03:38 AM+00:00 | 0 Volt | 44 Packet | 5 Packet | 57 % | 0 |
| 04/24/2025 12:02:37 AM+00:00 | 0 Volt | 49 Packet | 6 Packet | 60 % | 0 |
| 04/23/2025 11:01:37 PM+00:00 | 0 Volt | 48 Packet | 6 Packet | 58 % | 0 |
| 04/23/2025 10:00:38 PM+00:00 | 0 Volt | 45 Packet | 6 Packet | 63 % | 0 |
| 04/23/2025 8:59:38 PM+00:00 | 0 Volt | 41 Packet | 5 Packet | 63 % | 0 |
| 04/23/2025 7:58:38 PM+00:00 | 0 Volt | 43 Packet | 5 Packet | 58 % | 0 |
| 04/23/2025 6:57:38 PM+00:00 | 0 Volt | 46 Packet | 9 Packet | 60 % | 0 |
| 04/23/2025 5:56:38 PM+00:00 | 0 Volt | 46 Packet | 7 Packet | 61 % | 0 |
| 04/23/2025 4:55:38 PM+00:00 | 0 Volt | 51 Packet | 7 Packet | 61 % | 0 |
| 04/23/2025 3:54:38 PM+00:00 | 0 Volt | 53 Packet | 7 Packet | 66 % | 0 |
| 04/23/2025 2:53:38 PM+00:00 | 0 Volt | 57 Packet | 8 Packet | 65 % | 0 |
| 04/23/2025 1:52:38 PM+00:00 | 0 Volt | 55 Packet | 6 Packet | 64 % | 0 |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx ed: 0, 1, 0
Dig ed: 0, 1, 0
Decode: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)