RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

K2DLL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2DLL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734920337	15 Volt	1300 Pkt	80 Pkt	79 Pcnt
1734919434	15 Volt	1280 Pkt	90 Pkt	79 Pcnt
1734918532	15 Volt	1290 Pkt	80 Pkt	79 Pcnt
1734917631	15 Volt	1280 Pkt	70 Pkt	78 Pcnt
1734916730	15 Volt	1260 Pkt	80 Pkt	78 Pcnt
1734915830	14.93 Volt	1250 Pkt	60 Pkt	78 Pcnt
1734914929	15 Volt	1240 Pkt	70 Pkt	77 Pcnt
1734914028	15 Volt	1220 Pkt	80 Pkt	77 Pcnt
1734913127	15 Volt	1230 Pkt	80 Pkt	77 Pcnt
1734912227	15 Volt	1250 Pkt	100 Pkt	76 Pcnt
1734911328	15 Volt	1270 Pkt	110 Pkt	76 Pcnt
1734910425	15 Volt	1260 Pkt	110 Pkt	75 Pcnt
1734909526	15 Volt	1250 Pkt	100 Pkt	74 Pcnt
1734908623	15 Volt	1250 Pkt	80 Pkt	76 Pcnt
1734907722	15 Volt	1270 Pkt	70 Pkt	77 Pcnt
1734906821	15 Volt	1290 Pkt	70 Pkt	78 Pcnt
1734905921	15 Volt	1300 Pkt	70 Pkt	77 Pcnt
1734905019	15 Volt	1290 Pkt	80 Pkt	77 Pcnt
1734904118	15 Volt	1280 Pkt	70 Pkt	76 Pcnt
1734903218	15 Volt	1280 Pkt	80 Pkt	76 Pcnt
1734902317	15 Volt	1260 Pkt	80 Pkt	75 Pcnt
1734901416	15 Volt	1290 Pkt	70 Pkt	76 Pcnt
1734900516	15 Volt	1310 Pkt	70 Pkt	76 Pcnt
1734899614	15 Volt	1370 Pkt	80 Pkt	77 Pcnt
1734897812	15 Volt	1360 Pkt	80 Pkt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)