This is the latest recevied telemetry packets stored in our database for station/object W4KEL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 04/13/2025 12:19:07 PM+00:00 | 13.01 | 10.47 | 0 | 0 | 0 |
| 04/13/2025 11:49:09 AM+00:00 | 13.04 | 9 | 0 | 0 | 0 |
| 04/13/2025 10:49:13 AM+00:00 | 13.07 | 8.03 | 0 | 0 | 0 |
| 04/13/2025 10:19:15 AM+00:00 | 13.54 | 7.54 | 0 | 0 | 0 |
| 04/13/2025 9:49:18 AM+00:00 | 13.04 | 8.51 | 0 | 0 | 0 |
| 04/13/2025 9:19:20 AM+00:00 | 13.07 | 8.51 | 0 | 0 | 0 |
| 04/13/2025 6:19:34 AM+00:00 | 13.04 | 11.94 | 0 | 0 | 0 |
| 04/13/2025 5:49:36 AM+00:00 | 13.07 | 12.92 | 0 | 0 | 0 |
| 04/13/2025 4:49:41 AM+00:00 | 13.04 | 13.89 | 0 | 0 | 0 |
| 04/13/2025 4:19:43 AM+00:00 | 13.01 | 14.38 | 0 | 0 | 0 |
| 04/13/2025 3:49:45 AM+00:00 | 13.1 | 14.87 | 0 | 0 | 0 |
| 04/13/2025 3:19:47 AM+00:00 | 13.01 | 15.36 | 0 | 0 | 0 |
| 04/13/2025 2:19:51 AM+00:00 | 13.04 | 15.85 | 0 | 0 | 0 |
| 04/13/2025 1:49:53 AM+00:00 | 13.01 | 16.34 | 0 | 0 | 0 |
| 04/13/2025 1:19:55 AM+00:00 | 13.16 | 17.32 | 0 | 0 | 0 |
| 04/13/2025 12:49:57 AM+00:00 | 13.04 | 17.32 | 0 | 0 | 0 |
| 04/12/2025 9:20:09 PM+00:00 | 13.07 | 24.16 | 0 | 0 | 0 |
| 04/12/2025 8:50:11 PM+00:00 | 12.98 | 24.65 | 0 | 0 | 0 |
| 04/12/2025 8:20:12 PM+00:00 | 12.98 | 25.14 | 0 | 0 | 0 |
| 04/12/2025 7:50:14 PM+00:00 | 13.04 | 25.14 | 0 | 0 | 0 |
| 04/12/2025 7:20:15 PM+00:00 | 12.98 | 25.14 | 0 | 0 | 0 |
| 04/12/2025 6:50:16 PM+00:00 | 13.04 | 25.63 | 0 | 0 | 0 |
| 04/12/2025 5:50:18 PM+00:00 | 13.04 | 24.16 | 0 | 0 | 0 |
| 04/12/2025 5:20:20 PM+00:00 | 13.01 | 23.67 | 0 | 0 | 0 |
| 04/12/2025 4:50:21 PM+00:00 | 13.01 | 23.18 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)