RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BV6BU-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BV6BU-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1734969068	32.1 C	35 p	98 p	3604 p
1734967869	33.6 C	32 p	91 p	3592 p
1734966668	32.7 C	31 p	89 p	3590 p
1734965468	32.7 C	28 p	86 p	3582 p
1734964268	33.7 C	30 p	94 p	3577 p
1734963068	33.6 C	28 p	106 p	3568 p
1734961869	34 C	36 p	108 p	3571 p
1734960668	33.9 C	42 p	105 p	3563 p
1734959468	33.4 C	30 p	100 p	3564 p
1734958268	32.2 C	33 p	100 p	3594 p
1734957068	33.1 C	37 p	115 p	3627 p
1734955868	33.2 C	30 p	141 p	3653 p
1734954669	32.9 C	48 p	202 p	3678 p
1734953468	32.9 C	63 p	208 p	3678 p
1734952268	32.3 C	91 p	191 p	3653 p
1734951069	32.8 C	54 p	199 p	3603 p
1734949868	33.3 C	46 p	239 p	3600 p
1734948668	32.8 C	99 p	282 p	3606 p
1734947468	33.2 C	94 p	226 p	3563 p
1734946268	32.8 C	89 p	182 p	3548 p
1734945068	33.6 C	43 p	155 p	3539 p
1734943869	32.8 C	50 p	205 p	3586 p
1734942669	32.5 C	62 p	258 p	3626 p
1734941469	32.3 C	93 p	298 p	3646 p
1734940268	33.1 C	103 p	275 p	3652 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)