RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK4RBT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734899548	14.14 Volt	390 Pkt	10 Pkt	58 Pcnt
1734897747	14.14 Volt	400 Pkt	10 Pkt	53 Pcnt
1734896846	14.14 Volt	430 Pkt	10 Pkt	54 Pcnt
1734895945	14.14 Volt	490 Pkt	10 Pkt	58 Pcnt
1734895044	14.14 Volt	540 Pkt	10 Pkt	59 Pcnt
1734894143	14.14 Volt	570 Pkt	10 Pkt	60 Pcnt
1734893242	14.14 Volt	560 Pkt	20 Pkt	57 Pcnt
1734892342	14.14 Volt	540 Pkt	20 Pkt	55 Pcnt
1734891441	14.14 Volt	490 Pkt	20 Pkt	52 Pcnt
1734890540	14.14 Volt	460 Pkt	20 Pkt	52 Pcnt
1734889639	14.14 Volt	450 Pkt	10 Pkt	53 Pcnt
1734888738	14.14 Volt	440 Pkt	10 Pkt	52 Pcnt
1734887837	14.14 Volt	440 Pkt	10 Pkt	52 Pcnt
1734886936	14.14 Volt	440 Pkt	10 Pkt	52 Pcnt
1734886035	14.14 Volt	460 Pkt	10 Pkt	52 Pcnt
1734885134	14.14 Volt	480 Pkt	10 Pkt	52 Pcnt
1734884234	14.14 Volt	500 Pkt	10 Pkt	56 Pcnt
1734883333	14.14 Volt	520 Pkt	10 Pkt	56 Pcnt
1734882432	14.14 Volt	520 Pkt	10 Pkt	57 Pcnt
1734881531	14.14 Volt	500 Pkt	10 Pkt	59 Pcnt
1734880630	14.14 Volt	530 Pkt	10 Pkt	59 Pcnt
1734879729	14.14 Volt	500 Pkt	10 Pkt	60 Pcnt
1734878828	14.14 Volt	490 Pkt	10 Pkt	59 Pcnt
1734877927	14.14 Volt	490 Pkt	10 Pkt	57 Pcnt
1734877027	14.14 Volt	450 Pkt	10 Pkt	53 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)