RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VE7EOL-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7EOL-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1734894542	121	141	139	124	115
1734890941	121	141	138	124	115
1734880138	121	141	140	125	116
1734876537	122	141	138	124	115
1734872936	121	141	138	123	114
1734869335	122	141	137	123	114
1734865734	122	142	138	122	113
1734862133	122	142	138	123	114
1734858532	121	142	137	122	114
1734854931	122	142	138	123	114
1734851329	122	142	139	124	114
1734847728	121	143	139	124	114
1734844127	122	143	138	122	113
1734840526	122	143	139	124	114
1734836925	121	142	138	122	113
1734833324	122	142	139	123	114
1734829723	122	143	137	123	113
1734826122	122	143	139	124	114
1734822521	122	143	138	122	112
1734815319	121	142	138	124	115

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)