RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ON0TVO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0TVO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Rx1h*	Dg1h*	Eff1h*	Eff*
1734916902	6.5 C	140 Pkt	60 Pkt	61 Pcnt	59 Pcnt
1734916302	6.5 C	130 Pkt	60 Pkt	59 Pcnt	59 Pcnt
1734915702	6.5 C	140 Pkt	60 Pkt	60 Pcnt	59 Pcnt
1734915102	6.5 C	140 Pkt	60 Pkt	61 Pcnt	59 Pcnt
1734914502	6.5 C	150 Pkt	70 Pkt	65 Pcnt	59 Pcnt
1734913902	5.5 C	160 Pkt	70 Pkt	64 Pcnt	59 Pcnt
1734913302	6.5 C	150 Pkt	70 Pkt	62 Pcnt	59 Pcnt
1734912702	7 C	160 Pkt	60 Pkt	62 Pcnt	59 Pcnt
1734912102	7 C	160 Pkt	70 Pkt	59 Pcnt	59 Pcnt
1734911506	7 C	160 Pkt	70 Pkt	59 Pcnt	59 Pcnt
1734910902	7 C	150 Pkt	60 Pkt	55 Pcnt	59 Pcnt
1734910302	7 C	140 Pkt	60 Pkt	53 Pcnt	59 Pcnt
1734909702	7 C	140 Pkt	60 Pkt	54 Pcnt	59 Pcnt
1734909102	6.5 C	130 Pkt	70 Pkt	53 Pcnt	59 Pcnt
1734908502	7 C	120 Pkt	60 Pkt	55 Pcnt	59 Pcnt
1734907905	7 C	120 Pkt	60 Pkt	56 Pcnt	59 Pcnt
1734907302	7 C	130 Pkt	70 Pkt	61 Pcnt	59 Pcnt
1734906703	7 C	120 Pkt	70 Pkt	61 Pcnt	59 Pcnt
1734906103	7 C	120 Pkt	60 Pkt	63 Pcnt	59 Pcnt
1734905503	6.5 C	120 Pkt	60 Pkt	63 Pcnt	59 Pcnt
1734904903	6.5 C	110 Pkt	60 Pkt	61 Pcnt	59 Pcnt
1734904307	6 C	100 Pkt	60 Pkt	59 Pcnt	59 Pcnt
1734903703	6 C	90 Pkt	60 Pkt	58 Pcnt	59 Pcnt
1734903103	5.5 C	90 Pkt	50 Pkt	59 Pcnt	59 Pcnt
1734902503	5.5 C	100 Pkt	60 Pkt	61 Pcnt	59 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)