RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VE6DWX-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE6DWX-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Temp*
1734951672	13.05 Volt	1.5 C
1734949869	13.13 Volt	1.5 C
1734948070	13.05 Volt	1.5 C
1734946269	13.13 Volt	1 C
1734942669	13.13 Volt	1 C
1734939069	13.13 Volt	1 C
1734930076	13.13 Volt	1 C
1734928269	13.2 Volt	1 C
1734924670	13.2 Volt	1 C
1734921069	13.2 Volt	1.5 C
1734917470	13.2 Volt	2 C
1734915673	13.2 Volt	2.5 C
1734910393	13.28 Volt	4 C
1734908892	13.43 Volt	4.5 C
1734906670	13.5 Volt	4.5 C
1734904870	13.65 Volt	4.5 C
1734903071	13.73 Volt	4.5 C
1734899471	13.8 Volt	4 C
1734897673	12.9 Volt	3.5 C
1734895871	13.88 Volt	3 C
1734894550	13.8 Volt	3 C
1734892621	14.63 Volt	2.5 C
1734890474	13.8 Volt	2.5 C
1734888672	13.43 Volt	2.5 C
1734886873	13.35 Volt	2.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)