RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

OZ7DIH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ7DIH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734985745	12.48 Volt	0 Pkt	0 Pkt	12 Pcnt
1734985446	12.48 Volt	0 Pkt	0 Pkt	16 Pcnt
1734985144	12.48 Volt	0 Pkt	0 Pkt	16 Pcnt
1734984847	12.48 Volt	0 Pkt	0 Pkt	20 Pcnt
1734984543	12.48 Volt	0 Pkt	0 Pkt	19 Pcnt
1734984244	12.48 Volt	0 Pkt	0 Pkt	20 Pcnt
1734983942	12.48 Volt	0 Pkt	0 Pkt	17 Pcnt
1734983042	12.48 Volt	0 Pkt	0 Pkt	28 Pcnt
1734982744	12.48 Volt	0 Pkt	0 Pkt	30 Pcnt
1734981841	12.48 Volt	10 Pkt	10 Pkt	35 Pcnt
1734981543	12.48 Volt	10 Pkt	10 Pkt	38 Pcnt
1734981240	12.48 Volt	10 Pkt	10 Pkt	42 Pcnt
1734980940	12.4 Volt	10 Pkt	10 Pkt	44 Pcnt
1734980639	12.48 Volt	10 Pkt	10 Pkt	47 Pcnt
1734980343	12.4 Volt	10 Pkt	10 Pkt	45 Pcnt
1734980042	12.48 Volt	10 Pkt	0 Pkt	43 Pcnt
1734979739	12.4 Volt	10 Pkt	0 Pkt	45 Pcnt
1734979440	12.48 Volt	0 Pkt	0 Pkt	40 Pcnt
1734979139	12.4 Volt	0 Pkt	0 Pkt	42 Pcnt
1734978837	12.48 Volt	0 Pkt	0 Pkt	42 Pcnt
1734978540	12.48 Volt	0 Pkt	0 Pkt	40 Pcnt
1734978237	12.48 Volt	0 Pkt	0 Pkt	36 Pcnt
1734977937	12.48 Volt	0 Pkt	0 Pkt	31 Pcnt
1734977339	12.48 Volt	0 Pkt	0 Pkt	27 Pcnt
1734977036	12.48 Volt	0 Pkt	0 Pkt	28 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)