RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YB8VK-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB8VK-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1734965960	0 Pkt	-60 dBm	1.37 V
1734965628	0 Pkt	-58 dBm	1.09 V
1734965312	0 Pkt	-60 dBm	0.02 V
1734964984	0 Pkt	-58 dBm	0 V
1734964665	0 Pkt	-60 dBm	0.27 V
1734964340	0 Pkt	-57 dBm	0 V
1734964048	0 Pkt	-59 dBm	0.49 V
1734963729	0 Pkt	-60 dBm	0.76 V
1734963399	0 Pkt	-59 dBm	0.84 V
1734963127	0 Pkt	-59 dBm	0.53 V
1734962731	0 Pkt	-60 dBm	1.03 V
1734962457	0 Pkt	-58 dBm	0.14 V
1734962086	0 Pkt	-59 dBm	0 V
1734961912	0 Pkt	-57 dBm	0.29 V
1734961497	0 Pkt	-57 dBm	0.16 V
1734961126	0 Pkt	-59 dBm	0.41 V
1734960907	0 Pkt	-59 dBm	1.13 V
1734960481	0 Pkt	-60 dBm	0.08 V
1734960176	0 Pkt	-59 dBm	0.82 V
1734959833	1 Pkt	-59 dBm	0.02 V
1734959511	0 Pkt	-59 dBm	0.02 V
1734959247	0 Pkt	-58 dBm	0 V
1734959086	0 Pkt	-58 dBm	0.06 V
1734959085	0 Pkt	-58 dBm	0.27 V
1734958440	0 Pkt	-58 dBm	0.66 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)