RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9M2RIL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2RIL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TxTraffic*	RSSI*	Voltage*
1734999031	2 Pkt	-75 dBm	5 V
1734997031	16 Pkt	-82 dBm	4.98 V
1734996203	1 Pkt	-82 dBm	5 V
1734995790	15 Pkt	-82 dBm	5 V
1734995001	9 Pkt	-80 dBm	4.98 V
1734994563	1 Pkt	-82 dBm	5 V
1734994427	1 Pkt	-82 dBm	4.98 V
1734994171	8 Pkt	-83 dBm	4.98 V
1734993564	7 Pkt	-83 dBm	5.04 V
1734992781	17 Pkt	-82 dBm	5.02 V
1734991201	0 Pkt	-82 dBm	5 V
1734990388	1 Pkt	-84 dBm	5 V
1734990239	1 Pkt	-81 dBm	4.98 V
1734989539	4 Pkt	-83 dBm	4.98 V
1734989106	0 Pkt	-87 dBm	4.98 V
1734987647	2 Pkt	-83 dBm	5 V
1734987478	20 Pkt	-84 dBm	4.98 V
1734986055	8 Pkt	-83 dBm	5 V
1734985560	13 Pkt	-83 dBm	4.98 V
1734984810	4 Pkt	-83 dBm	5 V
1734984629	0 Pkt	-80 dBm	5 V
1734984092	4 Pkt	-83 dBm	4.98 V
1734983899	1 Pkt	-83 dBm	5 V
1734983519	4 Pkt	-82 dBm	4.98 V
1734982988	1 Pkt	-78 dBm	5.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)