RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA7MZ-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA7MZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1735003440	2 Pkt	-49 dBm	2.85 V
1735002863	4 Pkt	-49 dBm	1.64 V
1735002133	2 Pkt	-50 dBm	1.58 V
1735001399	1 Pkt	-49 dBm	1.58 V
1735000819	2 Pkt	-49 dBm	1.64 V
1735000090	2 Pkt	-48 dBm	1.6 V
1734999367	2 Pkt	-49 dBm	1.64 V
1734998637	3 Pkt	-49 dBm	1.66 V
1734997899	2 Pkt	-49 dBm	1.6 V
1734997169	1 Pkt	-49 dBm	1.64 V
1734996439	2 Pkt	-48 dBm	1.6 V
1734995717	4 Pkt	-49 dBm	2.89 V
1734995004	2 Pkt	-49 dBm	1.85 V
1734994257	2 Pkt	-50 dBm	1.56 V
1734993519	2 Pkt	-49 dBm	1.58 V
1734992785	1 Pkt	-51 dBm	1.56 V
1734992059	4 Pkt	-49 dBm	1.62 V
1734991337	2 Pkt	-52 dBm	1.56 V
1734990600	2 Pkt	-49 dBm	1.54 V
1734989870	2 Pkt	-49 dBm	1.6 V
1734989140	2 Pkt	-48 dBm	1.52 V
1734988405	2 Pkt	-48 dBm	1.54 V
1734987679	2 Pkt	-48 dBm	1.52 V
1734986948	1 Pkt	-50 dBm	1.68 V
1734986295	2 Pkt	-48 dBm	1.52 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)