RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YM4KOV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KOV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1734956115	35 Pkt	3 Pkt	31 dBm	14.21 V
1734955489	29 Pkt	2 Pkt	31 dBm	14.21 V
1734954863	23 Pkt	3 Pkt	31 dBm	14.21 V
1734954237	36 Pkt	3 Pkt	31 dBm	14.23 V
1734953612	38 Pkt	1 Pkt	31 dBm	14.15 V
1734951735	30 Pkt	3 Pkt	31 dBm	14.03 V
1734951109	34 Pkt	1 Pkt	31 dBm	14.17 V
1734950485	41 Pkt	1 Pkt	31 dBm	14.19 V
1734949857	31 Pkt	2 Pkt	31 dBm	14.19 V
1734949231	39 Pkt	0 Pkt	31 dBm	14.23 V
1734947977	37 Pkt	2 Pkt	31 dBm	14.21 V
1734946726	29 Pkt	3 Pkt	31 dBm	14.21 V
1734946099	25 Pkt	3 Pkt	31 dBm	14.48 V
1734945474	37 Pkt	4 Pkt	31 dBm	14.48 V
1734944847	26 Pkt	3 Pkt	31 dBm	14.48 V
1734944221	30 Pkt	4 Pkt	31 dBm	14.46 V
1734942345	31 Pkt	4 Pkt	31 dBm	14.54 V
1734941717	45 Pkt	3 Pkt	31 dBm	14.48 V
1734941089	39 Pkt	4 Pkt	31 dBm	14.58 V
1734940463	37 Pkt	3 Pkt	31 dBm	14.58 V
1734939837	28 Pkt	4 Pkt	31 dBm	14.56 V
1734939213	12 Pkt	7 Pkt	31 dBm	14.54 V
1734938586	32 Pkt	6 Pkt	31 dBm	14.58 V
1734937961	21 Pkt	4 Pkt	31 dBm	13.82 V
1734936086	21 Pkt	1 Pkt	31 dBm	13.7 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)