RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YC2PAB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC2PAB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1735059229	54 Pkt	0 Pkt	-75 dBm	13.54 V
1735055606	52 Pkt	1 Pkt	-76 dBm	13.54 V
1735051978	68 Pkt	0 Pkt	-76 dBm	13.54 V
1735048351	67 Pkt	0 Pkt	-74 dBm	13.54 V
1735044724	72 Pkt	3 Pkt	-75 dBm	13.54 V
1735041088	81 Pkt	5 Pkt	-75 dBm	13.54 V
1735037458	82 Pkt	0 Pkt	-75 dBm	13.54 V
1735033831	85 Pkt	4 Pkt	-77 dBm	13.56 V
1735030197	70 Pkt	1 Pkt	-77 dBm	13.54 V
1735026566	82 Pkt	2 Pkt	-76 dBm	13.54 V
1735022932	85 Pkt	3 Pkt	-75 dBm	13.54 V
1735019299	81 Pkt	6 Pkt	-75 dBm	13.54 V
1735015673	73 Pkt	7 Pkt	-79 dBm	13.54 V
1735012042	81 Pkt	1 Pkt	-80 dBm	13.6 V
1735008413	82 Pkt	0 Pkt	-78 dBm	13.56 V
1735004780	75 Pkt	6 Pkt	-79 dBm	13.64 V
1735001145	73 Pkt	0 Pkt	-78 dBm	13.54 V
1734997515	81 Pkt	2 Pkt	-76 dBm	13.58 V
1734993882	82 Pkt	0 Pkt	-70 dBm	13.54 V
1734990249	83 Pkt	1 Pkt	-70 dBm	13.56 V
1734986614	92 Pkt	1 Pkt	-69 dBm	13.58 V
1734982982	90 Pkt	0 Pkt	-69 dBm	13.56 V
1734979348	86 Pkt	0 Pkt	-68 dBm	13.56 V
1734975717	90 Pkt	0 Pkt	-70 dBm	13.56 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)