RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

OE9XVI-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE9XVI-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1736379451	12.38 Volt	720 Pkt	68 Pcnt	-64 °c
1736379151	12.38 Volt	720 Pkt	67 Pcnt	-64 °c
1736378851	12.38 Volt	720 Pkt	67 Pcnt	-64 °c
1736378551	12.3 Volt	730 Pkt	67 Pcnt	-64 °c
1736378251	12.38 Volt	720 Pkt	68 Pcnt	-64 °c
1736377951	12.38 Volt	730 Pkt	67 Pcnt	-64 °c
1736377651	12.38 Volt	730 Pkt	67 Pcnt	-64 °c
1736377351	12.38 Volt	730 Pkt	67 Pcnt	-64 °c
1736377051	12.38 Volt	730 Pkt	67 Pcnt	-64 °c
1736376751	12.38 Volt	740 Pkt	68 Pcnt	-64 °c
1736376451	12.38 Volt	730 Pkt	68 Pcnt	-64 °c
1736376151	12.38 Volt	750 Pkt	69 Pcnt	-64 °c
1736375851	12.38 Volt	740 Pkt	70 Pcnt	-64 °c
1736375551	12.38 Volt	740 Pkt	71 Pcnt	-64 °c
1736375251	12.38 Volt	730 Pkt	71 Pcnt	-64 °c
1736374951	12.38 Volt	730 Pkt	71 Pcnt	-64 °c
1736374651	12.38 Volt	740 Pkt	71 Pcnt	-64 °c
1736374351	12.38 Volt	740 Pkt	72 Pcnt	-64 °c
1736374051	12.38 Volt	740 Pkt	72 Pcnt	-64 °c
1736373751	12.38 Volt	750 Pkt	73 Pcnt	-64 °c
1736373451	12.3 Volt	750 Pkt	74 Pcnt	-64 °c
1736373151	12.38 Volt	760 Pkt	74 Pcnt	-64 °c
1736372851	12.38 Volt	750 Pkt	74 Pcnt	-64 °c
1736372551	12.38 Volt	750 Pkt	73 Pcnt	-64 °c
1736372251	12.3 Volt	760 Pkt	72 Pcnt	-64 °c

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)