RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

W1DMR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W1DMR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1736466878	14.25 Volt	1220 Pkt	70 Pcnt	187 Pkt
1736466578	14.25 Volt	1200 Pkt	70 Pcnt	192 Pkt
1736466278	14.25 Volt	1210 Pkt	71 Pcnt	170 Pkt
1736465978	14.25 Volt	1230 Pkt	70 Pcnt	193 Pkt
1736465678	14.25 Volt	1240 Pkt	70 Pcnt	212 Pkt
1736465378	14.25 Volt	1220 Pkt	70 Pcnt	162 Pkt
1736465078	14.25 Volt	1210 Pkt	69 Pcnt	195 Pkt
1736464778	14.25 Volt	1230 Pkt	69 Pcnt	208 Pkt
1736464478	14.25 Volt	1190 Pkt	68 Pcnt	148 Pkt
1736464178	14.25 Volt	1210 Pkt	69 Pcnt	203 Pkt
1736463878	14.25 Volt	1190 Pkt	68 Pcnt	177 Pkt
1736463578	14.25 Volt	1190 Pkt	68 Pcnt	158 Pkt
1736463278	14.25 Volt	1200 Pkt	67 Pcnt	182 Pkt
1736462978	14.25 Volt	1190 Pkt	67 Pcnt	216 Pkt
1736462678	14.25 Volt	1170 Pkt	66 Pcnt	192 Pkt
1736462378	14.25 Volt	1160 Pkt	67 Pcnt	183 Pkt
1736462078	14.25 Volt	1170 Pkt	67 Pcnt	190 Pkt
1736461778	14.25 Volt	1150 Pkt	67 Pcnt	173 Pkt
1736461478	14.25 Volt	1150 Pkt	67 Pcnt	184 Pkt
1736461178	14.25 Volt	1150 Pkt	67 Pcnt	185 Pkt
1736460878	14.25 Volt	1170 Pkt	67 Pcnt	168 Pkt
1736460278	14.25 Volt	1170 Pkt	67 Pcnt	177 Pkt
1736459678	14.25 Volt	1220 Pkt	69 Pcnt	166 Pkt
1736459378	14.25 Volt	1230 Pkt	69 Pcnt	187 Pkt
1736459078	14.25 Volt	1210 Pkt	69 Pcnt	189 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)