This is the latest recevied telemetry packets stored in our database for station/object SR0L-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 03/14/2025 8:57:30 PM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 21 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 8:37:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 26 count/10m | 1 count/10m | 0 count/10m |
| 03/14/2025 8:17:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 28 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 7:57:30 PM+00:00 | 0.04 Rx Erlang | 0 Tx Erlang | 37 count/10m | 1 count/10m | 0 count/10m |
| 03/14/2025 7:37:30 PM+00:00 | 0.05 Rx Erlang | 0 Tx Erlang | 42 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 7:17:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 28 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 6:57:30 PM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 20 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 6:37:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 23 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 6:17:30 PM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 16 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 5:57:30 PM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 10 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 5:37:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 14 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 5:17:30 PM+00:00 | 0.01 Rx Erlang | 0 Tx Erlang | 13 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 4:57:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 25 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 4:37:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 25 count/10m | 1 count/10m | 0 count/10m |
| 03/14/2025 4:17:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 24 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 3:57:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 30 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 3:37:30 PM+00:00 | 0.04 Rx Erlang | 0 Tx Erlang | 42 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 3:17:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 32 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 2:57:30 PM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 24 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 2:37:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 28 count/10m | 3 count/10m | 0 count/10m |
| 03/14/2025 2:17:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 25 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 1:57:30 PM+00:00 | 0.04 Rx Erlang | 0 Tx Erlang | 36 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 1:37:30 PM+00:00 | 0.04 Rx Erlang | 0 Tx Erlang | 34 count/10m | 0 count/10m | 0 count/10m |
| 03/14/2025 1:17:30 PM+00:00 | 0.02 Rx Erlang | 0 Tx Erlang | 21 count/10m | 1 count/10m | 0 count/10m |
| 03/14/2025 12:57:30 PM+00:00 | 0.03 Rx Erlang | 0 Tx Erlang | 26 count/10m | 0 count/10m | 0 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)