RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YB8VJT-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB8VJT-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TxTraffic*	RSSI*	Voltage*
1736689322	0 Pkt	-66 dBm	0.82 V
1736689000	1 Pkt	-68 dBm	0.82 V
1736688678	1 Pkt	-69 dBm	0.82 V
1736688356	0 Pkt	-67 dBm	0.82 V
1736688034	0 Pkt	-67 dBm	0.88 V
1736687712	0 Pkt	-68 dBm	0.82 V
1736687390	0 Pkt	-65 dBm	0.94 V
1736687068	0 Pkt	-66 dBm	1.03 V
1736686746	0 Pkt	-67 dBm	0.94 V
1736686424	0 Pkt	-68 dBm	0.92 V
1736686102	0 Pkt	-67 dBm	0.82 V
1736685780	0 Pkt	-67 dBm	0.8 V
1736685458	0 Pkt	-67 dBm	0.86 V
1736685136	1 Pkt	-67 dBm	0.84 V
1736684814	0 Pkt	-68 dBm	0.86 V
1736684494	0 Pkt	-70 dBm	0.86 V
1736684170	0 Pkt	-68 dBm	0.86 V
1736683848	0 Pkt	-69 dBm	0.88 V
1736683526	0 Pkt	-69 dBm	0.86 V
1736683204	1 Pkt	-67 dBm	0.84 V
1736682882	0 Pkt	-67 dBm	0.86 V
1736682560	0 Pkt	-67 dBm	0.86 V
1736682238	0 Pkt	-68 dBm	0.84 V
1736681916	2 Pkt	-67 dBm	0.84 V
1736681594	0 Pkt	-67 dBm	0.84 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)