RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BX4AEF-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX4AEF-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1736464353	21 C	23 p	85 p	2353 p
1736463153	22.6 C	31 p	84 p	2348 p
1736461954	22.4 C	31 p	75 p	2347 p
1736460754	23.1 C	22 p	65 p	2336 p
1736459553	23.1 C	22 p	62 p	2329 p
1736458353	23 C	21 p	61 p	2323 p
1736457153	22.2 C	19 p	63 p	2325 p
1736455953	22.9 C	21 p	63 p	2324 p
1736454753	22.8 C	23 p	60 p	2321 p
1736453553	23 C	19 p	61 p	2316 p
1736452353	22.8 C	18 p	62 p	2313 p
1736451153	23.1 C	24 p	68 p	2313 p
1736449953	22.4 C	20 p	73 p	2316 p
1736448753	22.6 C	24 p	114 p	2314 p
1736447553	23.5 C	29 p	125 p	2305 p
1736446353	22 C	61 p	135 p	2301 p
1736445153	22.8 C	35 p	90 p	2257 p
1736443953	23.3 C	39 p	73 p	2241 p
1736442753	23.5 C	16 p	59 p	2225 p
1736441553	23 C	18 p	57 p	2226 p
1736440353	22.8 C	25 p	56 p	2224 p
1736439153	23 C	14 p	60 p	2222 p
1736437953	22.4 C	17 p	61 p	2222 p
1736436754	22.4 C	29 p	60 p	2226 p
1736435554	22.6 C	15 p	63 p	2236 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)