RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LU2BFM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2BFM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RSSI*	Voltage*
1736459657	3 Pkt	-66 dBm	12.3 V
1736456935	0 Pkt	-66 dBm	12.43 V
1736454213	0 Pkt	-65 dBm	12.43 V
1736451491	0 Pkt	-65 dBm	12.45 V
1736448768	0 Pkt	-66 dBm	12.47 V
1736446046	0 Pkt	-66 dBm	12.45 V
1736443324	0 Pkt	-67 dBm	12.45 V
1736440602	1 Pkt	-66 dBm	12.47 V
1736439900	46 Pkt	-66 dBm	12.49 V
1736437177	45 Pkt	-65 dBm	12.47 V
1736434454	2 Pkt	-65 dBm	12.47 V
1736431660	0 Pkt	-61 dBm	12.49 V
1736428938	0 Pkt	-61 dBm	12.45 V
1736426215	0 Pkt	-60 dBm	12.43 V
1736423493	0 Pkt	-60 dBm	12.43 V
1736420771	0 Pkt	-62 dBm	12.47 V
1736418049	0 Pkt	-60 dBm	12.47 V
1736412605	0 Pkt	-60 dBm	12.47 V
1736409883	0 Pkt	-60 dBm	12.45 V
1736407161	0 Pkt	-63 dBm	12.47 V
1736404439	0 Pkt	-61 dBm	12.45 V
1736401717	0 Pkt	-60 dBm	12.47 V
1736398995	0 Pkt	-62 dBm	12.35 V
1736396273	0 Pkt	-63 dBm	12.33 V
1736393551	0 Pkt	-64 dBm	12.45 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)