This is the latest recevied telemetry packets stored in our database for station/object ON4VRT-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1736527892 | 15 Nr | 13.37 Vdc | 0 | 0 | 0 |
| 1736527592 | 15 Nr | 13.37 Vdc | 0 | 0 | 0 |
| 1736527291 | 15 Nr | 13.37 Vdc | 0 | 0 | 0 |
| 1736526991 | 15 Nr | 13.37 Vdc | 0 | 0 | 0 |
| 1736526691 | 15 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1736526542 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526512 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526488 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526476 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526466 | 14 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1736526456 | 14 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1736526446 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526426 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526412 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526392 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526357 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526317 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526301 | 14 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1736526252 | 14 Nr | 13.34 Vdc | 0 | 0 | 0 |
| 1736526227 | 14 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1736526201 | 14 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1736526191 | 14 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1736526181 | 15 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1736526176 | 15 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1736526171 | 7 Nr | 13.36 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)