RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS1AL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS1AL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1734890637	11 Pkt	0 Pkt	-43 dBm	14.68 V
1734889713	12 Pkt	0 Pkt	-43 dBm	14.77 V
1734888788	6 Pkt	0 Pkt	-42 dBm	14.17 V
1734887863	6 Pkt	0 Pkt	-43 dBm	14.21 V
1734886939	9 Pkt	0 Pkt	-44 dBm	14.27 V
1734886015	8 Pkt	0 Pkt	-42 dBm	14.19 V
1734885375	12 Pkt	0 Pkt	-43 dBm	14.48 V
1734884400	8 Pkt	0 Pkt	-46 dBm	14.66 V
1734883475	8 Pkt	0 Pkt	-43 dBm	14.66 V
1734882550	11 Pkt	0 Pkt	-43 dBm	14.68 V
1734881626	7 Pkt	0 Pkt	-44 dBm	14.66 V
1734880702	6 Pkt	0 Pkt	-44 dBm	14.46 V
1734880701	6 Pkt	0 Pkt	-43 dBm	14.46 V
1734879776	7 Pkt	0 Pkt	-43 dBm	14.15 V
1734878852	14 Pkt	1 Pkt	-42 dBm	14.77 V
1734877927	17 Pkt	0 Pkt	-42 dBm	14.72 V
1734877003	55 Pkt	1 Pkt	-42 dBm	14.72 V
1734876077	22 Pkt	0 Pkt	-43 dBm	14.72 V
1734875152	3 Pkt	0 Pkt	-42 dBm	14.52 V
1734874227	11 Pkt	0 Pkt	-49 dBm	14.72 V
1734873303	5 Pkt	0 Pkt	-43 dBm	14.77 V
1734872379	11 Pkt	0 Pkt	-46 dBm	14.7 V
1734871454	4 Pkt	1 Pkt	-44 dBm	14.66 V
1734870530	10 Pkt	0 Pkt	-43 dBm	14.68 V
1734869605	2 Pkt	1 Pkt	-43 dBm	13.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)