RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E24SAT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24SAT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734930322	2 Pkt	5 Pkt	0 Pkt	-49 dBm	1 V
1734928498	0 Pkt	0 Pkt	0 Pkt	-46 dBm	1.03 V
1734927245	0 Pkt	0 Pkt	0 Pkt	-48 dBm	1.03 V
1734925420	4 Pkt	1 Pkt	0 Pkt	-47 dBm	1.13 V
1734923595	3 Pkt	1 Pkt	0 Pkt	-48 dBm	1.17 V
1734921770	2 Pkt	3 Pkt	1 Pkt	-46 dBm	1.19 V
1734919944	0 Pkt	0 Pkt	0 Pkt	-46 dBm	1.29 V
1734918119	1 Pkt	0 Pkt	0 Pkt	-45 dBm	1.35 V
1734916294	5 Pkt	0 Pkt	0 Pkt	-47 dBm	1.17 V
1734914468	0 Pkt	0 Pkt	0 Pkt	-44 dBm	1.48 V
1734912643	5 Pkt	0 Pkt	0 Pkt	-45 dBm	1.52 V
1734910818	0 Pkt	0 Pkt	0 Pkt	-47 dBm	1.39 V
1734908993	2 Pkt	0 Pkt	0 Pkt	-47 dBm	1.42 V
1734907168	4 Pkt	1 Pkt	0 Pkt	-48 dBm	1.39 V
1734905342	0 Pkt	0 Pkt	0 Pkt	-49 dBm	1.37 V
1734903517	5 Pkt	0 Pkt	0 Pkt	-47 dBm	1.37 V
1734901692	2 Pkt	0 Pkt	0 Pkt	-48 dBm	1.33 V
1734899867	1 Pkt	0 Pkt	0 Pkt	-45 dBm	1.17 V
1734898043	4 Pkt	0 Pkt	0 Pkt	-47 dBm	1.31 V
1734896216	3 Pkt	0 Pkt	0 Pkt	-47 dBm	1.37 V
1734894391	5 Pkt	2 Pkt	0 Pkt	-47 dBm	1.31 V
1734892565	0 Pkt	2 Pkt	0 Pkt	-48 dBm	1.31 V
1734890740	0 Pkt	0 Pkt	0 Pkt	-48 dBm	1.23 V
1734888915	3 Pkt	0 Pkt	0 Pkt	-48 dBm	1.27 V
1734887089	1 Pkt	0 Pkt	0 Pkt	-48 dBm	1.19 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)