RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS7ZSX-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS7ZSX-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734855674	0 Pkt	0 Pkt	0 Pkt	-67 dBm	0 V
1734854010	0 Pkt	2 Pkt	0 Pkt	-69 dBm	0 V
1734852346	0 Pkt	0 Pkt	0 Pkt	-71 dBm	0 V
1734850682	0 Pkt	0 Pkt	0 Pkt	-71 dBm	0 V
1734849018	0 Pkt	0 Pkt	0 Pkt	-69 dBm	0 V
1734847354	0 Pkt	0 Pkt	0 Pkt	-68 dBm	0 V
1734845690	0 Pkt	0 Pkt	0 Pkt	-69 dBm	0 V
1734844026	0 Pkt	0 Pkt	0 Pkt	-69 dBm	0 V
1734842362	1 Pkt	1 Pkt	0 Pkt	-69 dBm	0 V
1734840698	5 Pkt	3 Pkt	0 Pkt	-70 dBm	0 V
1734839034	0 Pkt	1 Pkt	0 Pkt	-69 dBm	0 V
1734838909	0 Pkt	4 Pkt	37.5 Pkt	0 dBm	18.71 V
1734838314	0 Pkt	1 Pkt	37.5 Pkt	0 dBm	18.5 V
1734837719	0 Pkt	2 Pkt	36.7 Pkt	0 dBm	19.01 V
1734837370	0 Pkt	0 Pkt	0 Pkt	-69 dBm	0 V
1734835706	0 Pkt	0 Pkt	0 Pkt	-69 dBm	0 V
1734835340	0 Pkt	4 Pkt	36.7 Pkt	0 dBm	18.89 V
1734834745	0 Pkt	1 Pkt	36.7 Pkt	0 dBm	19.03 V
1734834042	0 Pkt	0 Pkt	0 Pkt	-71 dBm	0 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)