This is the latest recevied telemetry packets stored in our database for station/object OE3PDB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1734918756 | 10.35 Volt | 190 Pkt | 60 Pkt | 54 Pcnt | 0 None |
| 1734915152 | 10.35 Volt | 180 Pkt | 70 Pkt | 50 Pcnt | 0 None |
| 1734911548 | 10.35 Volt | 210 Pkt | 80 Pkt | 56 Pcnt | 0 None |
| 1734907945 | 10.35 Volt | 210 Pkt | 80 Pkt | 57 Pcnt | 0 None |
| 1734904341 | 10.35 Volt | 240 Pkt | 80 Pkt | 57 Pcnt | 0 None |
| 1734897135 | 10.35 Volt | 290 Pkt | 110 Pkt | 64 Pcnt | 0 None |
| 1734893531 | 10.35 Volt | 250 Pkt | 90 Pkt | 57 Pcnt | 0 None |
| 1734889928 | 10.35 Volt | 320 Pkt | 110 Pkt | 64 Pcnt | 0 None |
| 1734886325 | 10.35 Volt | 300 Pkt | 100 Pkt | 62 Pcnt | 0 None |
| 1734882722 | 10.35 Volt | 400 Pkt | 130 Pkt | 66 Pcnt | 0 None |
| 1734879118 | 10.35 Volt | 360 Pkt | 120 Pkt | 65 Pcnt | 0 None |
| 1734875515 | 10.35 Volt | 320 Pkt | 110 Pkt | 62 Pcnt | 0 None |
| 1734871911 | 10.35 Volt | 360 Pkt | 150 Pkt | 69 Pcnt | 0 None |
| 1734868308 | 10.35 Volt | 300 Pkt | 100 Pkt | 61 Pcnt | 0 None |
| 1734864704 | 10.35 Volt | 350 Pkt | 120 Pkt | 63 Pcnt | 0 None |
| 1734861100 | 10.35 Volt | 320 Pkt | 110 Pkt | 59 Pcnt | 0 None |
| 1734857497 | 10.35 Volt | 250 Pkt | 100 Pkt | 57 Pcnt | 0 None |
| 1734853894 | 10.35 Volt | 280 Pkt | 100 Pkt | 61 Pcnt | 0 None |
| 1734850290 | 10.35 Volt | 240 Pkt | 90 Pkt | 60 Pcnt | 0 None |
| 1734846687 | 10.35 Volt | 240 Pkt | 90 Pkt | 60 Pcnt | 0 None |
| 1734843083 | 10.35 Volt | 230 Pkt | 80 Pkt | 57 Pcnt | 0 None |
| 1734839480 | 10.35 Volt | 240 Pkt | 80 Pkt | 63 Pcnt | 0 None |
| 1734835876 | 10.35 Volt | 220 Pkt | 70 Pkt | 58 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)