RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

K7OWW-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K7OWW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TempIn*	Volt*	Rx1h*	Eff1h*
1735001146	43.9 F	13.58 Volt	130 Pkt	64 Pcnt
1735001145	43.9 F	13.58 Volt	130 Pkt	64 Pcnt
1735000545	43.9 F	13.58 Volt	120 Pkt	63 Pcnt
1734999945	43.9 F	13.58 Volt	110 Pkt	62 Pcnt
1734999346	44.8 F	13.58 Volt	100 Pkt	59 Pcnt
1734999345	44.8 F	13.58 Volt	100 Pkt	59 Pcnt
1734998745	45.7 F	13.58 Volt	100 Pkt	57 Pcnt
1734998145	44.8 F	13.58 Volt	110 Pkt	60 Pcnt
1734997546	43.9 F	13.5 Volt	100 Pkt	62 Pcnt
1734997545	43.9 F	13.5 Volt	100 Pkt	62 Pcnt
1734996945	43.9 F	13.58 Volt	100 Pkt	65 Pcnt
1734996345	43.9 F	13.58 Volt	110 Pkt	67 Pcnt
1734995746	43.9 F	13.58 Volt	120 Pkt	73 Pcnt
1734995745	43.9 F	13.58 Volt	120 Pkt	73 Pcnt
1734995145	43.9 F	13.58 Volt	130 Pkt	77 Pcnt
1734994545	44.8 F	13.58 Volt	130 Pkt	79 Pcnt
1734993946	45.7 F	13.58 Volt	130 Pkt	81 Pcnt
1734993945	45.7 F	13.58 Volt	130 Pkt	81 Pcnt
1734993345	43.9 F	13.58 Volt	140 Pkt	82 Pcnt
1734992745	43.9 F	13.58 Volt	130 Pkt	83 Pcnt
1734992146	43.9 F	13.58 Volt	110 Pkt	77 Pcnt
1734992145	43.9 F	13.58 Volt	110 Pkt	77 Pcnt
1734991545	43.9 F	13.58 Volt	100 Pkt	74 Pcnt
1734990945	43.9 F	13.58 Volt	100 Pkt	73 Pcnt
1734990346	44.8 F	13.58 Volt	100 Pkt	72 Pcnt

*Used Equation Coefficients:

TempIn: 0, 0.9, -83

Volt: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)