RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BM2OBM-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM2OBM-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1730370789	49 C	24 p	64 p	1564 p	254 p
1730369590	49 C	21 p	79 p	1569 p	242 p
1730368389	49 C	19 p	89 p	1608 p	229 p
1730367189	50 C	39 p	88 p	1652 p	217 p
1730365989	51 C	31 p	71 p	1669 p	203 p
1730364789	53 C	18 p	58 p	1676 p	189 p
1730363589	52 C	22 p	59 p	1687 p	179 p
1730362390	54 C	18 p	59 p	1695 p	165 p
1730361189	54 C	19 p	60 p	1729 p	151 p
1730359989	54 C	22 p	61 p	1737 p	139 p
1730358789	54 C	19 p	61 p	1754 p	124 p
1730357589	53 C	20 p	62 p	1759 p	111 p
1730356389	54 C	22 p	65 p	1759 p	99 p
1730355189	54 C	20 p	60 p	1760 p	90 p
1730353989	53 C	23 p	64 p	1763 p	80 p
1730352789	54 C	17 p	63 p	1780 p	69 p
1730351589	53 C	24 p	68 p	1818 p	60 p
1730350389	54 C	22 p	63 p	1822 p	43 p
1730349189	54 C	22 p	56 p	1824 p	30 p
1730347991	54 C	19 p	55 p	1830 p	21 p
1730346789	54 C	15 p	54 p	1838 p	10 p
1730345590	54 C	21 p	56 p	1847 p	3 p
1730344242	54 C	18 p	55 p	1850 p	107 p
1730343043	54 C	19 p	57 p	1880 p	96 p
1730341843	54 C	18 p	62 p	1893 p	85 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)